How to Find the Best Type of Attic Insulation

While there are several types of attic insulation Houston the most effective is fiberglass batt. This type is a plastic blanket reinforced with tiny glass fibers. It’s also known for being a lung and skin irritant. Fiberglass batt is often made with recycled glass or sand as the glazing. If you’re thinking about replacing the existing insulation in your attic, read on to find the best type for your home.

attic insulation

Ensure that you measure the thickness of the existing insulation before you start working on attic insulation. The Department of Energy recommends a minimum R-value for unfinished attics, based on the climate zone in your home. To take advantage of incentives for attic insulation, contact your state energy office or local utility company. Then use the Department of Energy’s online calculator to calculate the amount of insulation needed for your attic. Make sure that the amount of insulation is uniform.

The cost of attic insulation varies from $2.50 to $4 per square foot, depending on the materials used. A typical homeowner will spend between $1,500 and $2,500 to get the job done. The cost of attic insulation can be significantly reduced by performing the work yourself, but you should be confident in your skills or risk subpar results. You should also check local building codes to ensure that your attic is in compliance with those requirements.

If you plan to do this yourself, you should make sure to wear protective gear when working on the attic. For instance, it is illegal to vent exhaust into an attic. Several home builders have gotten away with this practice, but you should avoid it if possible. Humid exhaust air can ruin your insulation. If you must work on attic insulation yourself, you should consult a licensed electrician. In addition, it is a good idea to identify soffit vents and block them before installing insulation.

In addition to the material that you choose, you should consider its R-Value. The higher the R-Value, the better. Remember that different insulation materials have their own strengths and weaknesses. Some are better suited for certain attics than others. Choosing the right material for your home’s attic is vital for improving its energy efficiency. Just remember that you should consider how much insulation your attic will need and how much is enough.

As mentioned, attic insulation can make a significant difference in your home’s energy bills. Investing in this insulation can save you a significant amount of money on your cooling and heating bills. This can be a great DIY project for a weekend or a professional job in a few hours. You’ll be amazed at the difference in your monthly utility bills! A good insulation system can also make you more comfortable and save you money on your monthly utility bills.

Another type of attic insulation is spray foam, which is installed in a spray can. When sprayed into attic gaps, this foam expands into a solid foam. It’s the most effective attic insulation material available. Make sure to hire a professional to install spray foam insulation because it’s very difficult to apply it yourself. In addition to foam insulation, you should also consider blanket insulation. This type is an inexpensive way to install insulation. It’s designed to fit tightly between gaps and around obstacles.

The right contractor can make or break your attic insulation project. With so many professionals claiming to be the best, it can be challenging to choose the right one. The best contractors will be honest with you and provide you with a quote based on your home’s square footage and R-value. However, you should do your research and find an experienced, reputable company that can help you with your attic insulation needs. Take your time, make sure you choose wisely.